Automatic ESD Turnstile Entry Systems

Chapter One Tripod turnstile

1. Fully automatic tripod turnstile

2. Semiautomatic tripod turnstile

3. Mechnical tripod turnstile

 

Function    Parameter Core category	Automatic rod down	Automatic rod up	Roller barrier driven mode	Resetting mode	Registering function	Passing display	Single-wayfree passing set	Crawl-proof alarming
Fully automatic	√	√	Torque motor	Torque motor	√	√	√	√
Semiautomaic tripod turnstil	√	×	Manpower	Spring	√	√	√	√
Mechnical unresetting Tripod turnstile	×	×	Manpower	Spring	×	×	√	×

 

Technical parameters:

I. Vertical tripod turnstile

Descriptions: the turnstile provides a basic tripod to control access smoothly and effectively by basic operation, and also prevent illegal in and

out. The machine is well in design, rustproof, durable and can resist external destroy.

1.Technology speciation:
Framework: 304 Grade Stainless Steel
Specification: 420*330*990mm
Weight: 40kg
Arms length: 510mm
Machine center: imported Germanic technological motor
Logic voltage: 24v
2. Function:
2.1.Single/double walkway---controlled in one direction or both
2.2.A valid lock action can allow one passage at one time
Normally open---the machine will unlock when a valid signal is received
2.3.It will lock automatically if passage through turnstile is not completed within pre-set time, the set time can be adjusted via parameter change
3.Emergency configuration:
The tripod will drop automatically by power off or by hand to provide a clear walkway for escape in the event of an emergency
4. Interface: one standard port-RS485 ( Can add interface)
5. Control panel with count and LED digital function
6.Traffic-light:
A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable passing
7.Transit speed: 20-30 persons per minute
8. Work environment:
Indoor/outdoor
Temperature: －15℃~60℃

9. Applicable site: subway station, docks, tourism spots, exhibition, swimming hall, residence area, enterprises entrance and exit attendance, gateway guard, charge management, special access control.

 

 

II. Bridge-type tripod turnstile

 

Descriptions: the turnstile provides a basic tripod to control access smoothly and effectively by basic operation, and also prevent illegal in and out. The machine is well in design, rustproof, durable and can resist external destroy.
1.Technology speciation:
Framework: 304 Grade Stainless Steel
Specification: 1200*280*980mm
Weight: 70kg
Arms length: 510mm
Machine center: imported Germanic technological motor
Logic voltage: 24v
2. Function:
1.Single/double walkway---controlled in one direction or both
2.A valid lock action can allow one passage at one time
3.Normally open---the machine will unlock when a valid signal is received
4.It will lock automatically if passage through turnstile is not completed within pre-set time, the set time can be adjusted via parameter change
3. Emergency configuration:
The tripod will drop automatically by power off or by hand to provide a clear walkway for escape in the event of an emergency
4. Interface: one standard port-rs485
5.Control panel with count and LED digital function
6.Traffic-light:
A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable passing
7.Transit speed: 20——30 persons per minute
8.Work environment: Indoor/outdoor
9.Temperature: －15℃~60℃

10. Applicable site: subway station, docks, tourism spots, exhibition, swimming hall, residence area, enterprises entrance and exit attendance, gateway guard, charge management, special access control.

 

 

Chapter two-Swing turnstile

I. Swing /passage turnstile specification

1) Two directions controlled/one direction controlled

2) LED direction indicator

3) Flow Speed:

A)50 people/minute in the opening mode

B) 30 people/minute in the closing mode

4) Illegal invasion sound alarm

5)Anti-strike function

6)Keep open/close status if the power supply fails

 

Specifications:

 

pecifications:

1) Dry contact: DC12V, 10mA

2) RS485 interface

3) Pulse voltage signal, more than 100ms

4) Passageway: ≤700mm

5) Power: AC220V, 50Hz

6) Operating environment: Temperature :-40℃ to 80℃

RH ≤90%

7) Dimensions: 1, 400 x 300 x 1, 000mm

Can connect various access controllers such as IC/ID reader/writer, button controller,

barcode controller, code controller, fingerprint controller, or computer.

 

II. Pole turnstile specification

 

1)Two directions controlled/one direction controlled

Remark: Manual simple pole turnstile only one direction
2) LED direction indicator
3) Flow Speed:

A) 50 people/minute in the opening mode
B) 30 people/minute in the closing mode
4) Illegal invasion sound alarm
5) Anti-strike function
6) Keep open/close status if the power supply fails

Specifications:
1) Dry contact: DC12V, 10mA
2) RS485 interface
3) Pulse voltage signal, more than 100ms
4) Passageway: ≤700mm
5) Power: AC220V, 50Hz/AC110V, 60Hz(optional)
6) Operating environment: -25to 60degree, RH ≤90%
7) Dimensions: ￠168 x1050mm

8.Can connect various access controllers such as IC/ID reader/writer, button controller, barcode controller, code controller, fingerprint controller, or computer

9. Color: option

10. Applicable site: subway station, docks, tourism spots, exhibition, swimming hall, residence area, enterprises entrance and exit attendance, gateway guard, charge management, special access control

 

Chapter three –Wing/flat Turnstile.

 

Features:

• Designed reasonable and reliable movement, smooth running, long service life.
• Wing to open very quickly, effectively prevent the tail, and improve the access speed.
• After power-off, wing automatically open, forming a transparent channel.
• Prompted with the direction of LED lights.
• Adoption of a number of infrared sensors, to prevent illegal entry into the pedestrian access, to protect pedestrians safe and smooth through the channel.
• Anti-recoil, a pedestrian entering the channel from the opposite direction, immediately report to the police.
• Anti-tail, too many people to prevent a situation of non-permit.
• With automatic reset function, namely to obtain permission lock after the set time There is no lock, wing gates automatic cancellation of this authority back to the initial state.
• Waterproof, sunscreen, cold and high temperature.
• Installation with personalized interface, compatible with IC, ID cards and other smart cards.
• A unified, standard external electrical interface, read and write device with a variety of freely Articulated, easy system integration.
• Can be extended to automatic identification systems, achieve access control, attendance, fees and other functions.
• Be integrated with other types channels with the use of product.

• Box materials: Stainless steel
• Internal structure: Steel frame structure
• Box Dimensions: See product diagram
• Wide channel: See product diagram
• Arm wing materials: Stainless steel, acrylic, etc.
• Core voltage: DC24V.

 

 

 

• Control signal: relay signal input.
• Lighting tips: green movement, the alarm curfew.
• Power indicator light job: DC12V±5%.
• Prevailing speed: Normally open mode: 50 passengers / min.

Normally closed mode: 30 passengers / min.

 

 

 

 

 

 

• Read the first installation spaces: 2
• Control panel installation spaces: 2
• Gate opening, clearance time: 0.4 seconds
• Ambient temperature: -15 degrees~60 degrees
• Relative humidity: Relative humidity ≤90%, non-Gel

Chapter Four-Full heigh turnstile.

FULL HEIGHT /ROTATION TURNSTILE:

 

1.Model:CXT-Z170-1
The rotation turnstile use advance driver control technology. Can satisfy

Different style of building to access control requirements by changing design in a great deal of range. It is used for safety protect of external equipment of factory, sport ground, entertainment place, Park and so on.

The rotation turnstile with automatic enter-exist design and very complete system is extensively used. It can connect the reader of access control, check-in ticket system in order to prohibit unauthorized entrance

2. Structure
2.1 Main structure
Use special treatment stainless.
2.2 Driver structure
Driver structure compile to the control system, drive system, electronic lock together. It is small volume, lower noise, maintenance free. His special suspension drive style is ACEPLAS’S new own innovation

technology.

2.3 Main drive motor and control
The drive motor is brushless direct current motor. The motor volume and strength control advance place in the world. The highest precise automatic drive system under small power replace the alternating current motor drive under current VVVF drive control.

His main character is small volume, higher output power, lower noise

Maintenance free, lower moment of inertia control, highest precise control. This is not satisfied by the alternating current motor drive.

The direct-current motor of the rotation turnstile use PWM modulation controller digital quantity by hall element and increment axle coder with automatic adjusting speed and fix precise location.

3．Running ways:
1.Manual: *push with strength * Free push
2.Automatic start/stop way
3.Automatic continue running way
4.Safety running way(Need match reader,loading system or animal distinguish system)

 

option:
• Under Stopping power, can manual open lock.；

• Can add reader, interphone, coin-operated vending machine and so on；
• Install expansion joint spare parts in aluminum cover；
• Issuing signal equipment ；Inspection generator with equipment；Urgent power supply；
•Control console in the long distance or Control board(Open,close ,reject)；
•Waterproof cover；
•Install decoration board and waterproof cover；
•Install ceil board.Leaking pipe replace the waterproof cover

(Customer can connect the pipe to drainage system)；
•Install light. Can install many items on the cover.

 

The rotation turnstile technical data:

Model:CXT-Z 170-1

• Power voltage:220V
• Control voltage:12V
• Power:80W
• Input connecter:Connecting point switch signal
• Working Temperature:-40°C----85°C
• Working R.H:95%
• Structure material:202/304 stainless steel
• Weight:200KG
• Size:W1630*D1450*H2300MM

Function character:

• Brush card, manual operate ,automatic return orginal place.
• Single ,double access

• Every time the turnstile rotate 120 degree

3pcs of turnstile door keep on closing status.

 

 

FULL HEIGHT TURNSTILE

• Manual
• Fully automatic
• Semiautomatic
• Three-Wing
• Four-Wing

FUNCTION AND PARAMETERS CONTRAST TABLE

Function parameter Core category	Power-off free passing	Automatic power-lock	Rotate wing driven mode	Resetting mode	Sing-way free passing set
Standard	√	√	Manpower	Manpower	√

Power-off free passing

 

 

 

 

 

 

 

 

 

 

• Automatic power-lock
• Rotate wing driven mode
• Resetting mode
• Single-way free passing set

Technical parameters:

1. Power Supply:AC220±10V, 50Hz

2. Operating environment temperature: －15℃~60℃

3. Relative humidity: <95%, no dense

4. Passing speed: 30 persons/min (IC card)

5. Motor: 0.5NM/24V (fully automatic)

6. Input port:_12V level signal or pulse wide >100ms DC 12V pulse signal.

Current>10mA

8. Communication port: RS 485 electric equipment standard

9. Communication coverage: ≤1200m

10. Material: SUS 304 or mild-steel powder coating

11. Weight: about 150kg

12. Colour: any colour provided for 13. you to choose

13. Applicable site: subway station, docks, tourism spots, exhibition, swimming hall, residence area, enterprises entrance and exit attendance, gateway guard, charge management, special access control